Jeep Cherokee Transfer Case Skid Plate 1984-2001, XJ

Our Jeep Cherokee XJ 1/4 flat skid plate was designed as an addition to our Clayton Off Road Inc. coil conversion lift kits. It bolts onto the front 3 piece cross member, and requires a custom rear mount to be welded into the unibody frame rails. This rear mount is part of the coil conversion kit and necessary to install this skid plate. Kits comes with 1/4 flat skid, and hardware ONLY.

This kit is NOT intended to be used on a stock setup.

NOTES:

1. Designed to be used with our front XJ 3 piece cross member or front 3 link cross member and the XJ rear skid plate mount or XJ rear coil conversion cross member, and the auto or manual side plates.

2. You will need to drill and tap included hardware to install this skid plate. 

3. Please note this item(s) ships out of a box! Cosmetic damage e.g. surface rust or scratches may result during shipping and items would not be considered damaged, or eligible for a return/replacement or compensation. Cosmetic damage will not affect the performance of the actual product, however, If you would like to avoid these minor cosmetic issues please feel free to email us for a freight quote and we can arrange product shipment on a pallet.